Used to produce PU micro popes elastomer products,the final products with light weight,deformable,impact resistance,easy molding,folding resistance, good elasticity and also with a high density and strength...
Contact us Online ordering-
Application
Used to produce PU micro popes elastomer products,the final products with light weight,deformable,impact resistance,easy molding,folding resistance, good elasticity and also with a high density and strength...
-
Product samples
-
Features
1、Measurement precision: equipped with a high precision and low speed gear pump, with error≤5‰.
2、Mixing uniformly: tooth type design, perfect in shearing mixing head which has a reliable performance.
3、Pouring head: adopting a special made mechanical seal, avoiding material feed back and gas leak.
4、Stable material temp: each material tank has a temperature control system, insure the whole material with a stable temperature, which has a error <±2℃.
5、The whole machine is controlled by a PLC and touch-screen system, which can display frequency, speed and flowing rate of the machine; it is easy to operate and can store multiple formulations.
-
Working conditions
Component
mixing ratio (Weight)
Temp℃
Viscosity(CPS)
A(Polyol)
100
40~60
<3000
B(MDISemi-prepolymer)
80~120
40~60
<2000
-
Main parameters
Item/Type
EP20F-MDI1
EP20F-MDI2
EP20F-MDI3
Total capacity/output
(g/s)8~40
33~83
50~133